钢丝绳电动葫芦是一种小型起重设备,钢丝绳电动葫芦具有结构紧凑,重量轻,体积小,零部件通用性强,操作方便等优点,它既可以单独安装在工字钢上,也可以配套安装在电动或手动单梁、双梁、悬臂、龙门等起重机上使用。电机一般使用的是锥型电机,停止后自动锁死抱闸,与其配套的钢丝绳包括磷化涂层钢丝绳、镀锌钢丝绳和光面钢丝绳。
主要用于各种提升、牵移、装卸重物,油罐倒装焊接,如各种大中型砼、钢结构及机械设备的安装和移动,适用于建筑安装公司、厂矿的土木建筑工程及桥梁施工、电力、船舶、汽车制造、建筑、公路、桥梁、冶金、矿山、边坡隧道、井道治理防护等基础建设工程的机械设备。
CD1、MD1电动葫芦
CD,, MD, Electric Hoist
简介A Brief Introduction
CD1型,MD1型钢丝绳电动葫芦是一种轻小型起重设备,它可以安装在葫芦单梁、桥式起重机、门式
起重机、悬臂起重机上。稍加改动,还可作卷扬用。因此,它是工厂、矿山、港口、仓库、货场、商店等常用的起重设备之一,
是提高劳动效率,改善劳动条件的必备机械。
CD1型电动葫芦的起升速度为常速,可以满足一般使用要求;MD1型电动葫芦具有两种起升速度-常速
和慢速。慢速工作时,可以满足精密装卸,砂箱合模,机床检修等精细作业的要求。所以,MD1型电动葫
芦的适用范围比CD1型电动葫芦更为广泛。
为满足较大吨位起重作业的要求,我厂还生产WH20T,32T电动葫芦。
Model CD. MD Wirerope Electric Hoist is a small-sized lifting equipment, which can be mounted on
single beam, bridge, ganty and Jib cranes, With slight modification, it can also be used as a winch. Itis
widely used in factories, mines, harbours, warehouses, cargo storage areas and shops, essential in raising
working efficiency and improving working conditions
.
Model CD, Electric Hoist has only one normal speed, which can satisfy normal application, Model
lectric Hoist provides two speeds: normal speed and low speed, at a low speed, it can do precise
MD
loading and unloading, mounding of sand box, maintenance of machine tools, etc. Thus Model MD
lectric Hoists is more widely used than Model CD.
To meet the needs of lifting heavier cargo, our factory also manufactures WH20 WH32T Electric
hoist.